schlüter shower channel

a. KERDI: Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the mortar bed surrounding KERDI-LINE with a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design. Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. Begin the drain installation by dry fitting the components. Find the website that's made specifically for you. Read more, Units 3-5 Bardon 22, KERDI-LINE is available in channel lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments. Check to make sure the KERDI-LINE is level. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. Channel body with Schluter®-KERDI waterproofing collar B. Note: Protect the visible surfaces of the grate frame and grate from contact with setting and grouting materials. Schlüter ® -KERDI-LINE-H is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. The 800mm linear drainage channel was installed in an intermediate location, sloped to from both sides using the Schlüter-Kerdi-Shower-L and Schlüter-Kerdi-Shower-LS pre-sloped shower boards. 20 The elevation should be set such that the frame will be flush with the surface of the tile covering. Schlüter®-KERDI-SHOWER-L. Schlüter®-KERDI-SHOWER-L is a two part sloped tray with a 2% slope and a pre-adhered coating of Schlüter®-KERDI for the direct installation of tiles in floor level showers and for the connection of the folded parts of the sloped tray. KERDI-LINE-STYLE grate designs are available in 20” to 48” (50 cm – 120 cm) lengths with a 29/32” (23 mm) frame height which is able to accommodate ¼” to 11/16” (6mm – 18 mm) covering thicknesses. Clean the grates and profiles using common household cleaning agents. Setting and grouting materials must be removed immediately. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the substrate and install the tiles, ensuring full coverage. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation. Accessories are used to enhance tiled shower applications, providing shelving, splashguards at the entrances to curbless showers, support channels for glass walls, and wall finishing that eliminates the need to cut wedges of tile in KERDI-LINE applications. next to the channel support to fit flush with the surface. Schluter Kerdi Drain 4 In X Pvc Kit Stainless. Particularly practical: The Schlüter-KERDI- BOARD installation modules with pre-milled cable channels. This assures that moisture is not only kept away from the building structure, but also drains where it cannot do any harm. 7 Do not use abrasive or alkaline cleaning agents. Read more, Schlüter®-TROBA-LINE-TL/-TLR/-TLR-E is a stainless steel drainage channel that can be placed at low levels to doorsills or wall connections on balconies and terraces to prevent water accumulation. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the substrate where the drain is to be placed with a notched trowel and solidly embed the channel support in the mortar. Slope the mortar bed using the bonding flange and mortar screeds as guides. Height of channel support: DN 50 (50 mm) = 48 mm For quick and easy installation, the chan-nel body for KERDI-LINE-H50 and H40 is simply inserted into the precisely matching polystyrene channel support. Read more, Schlüter-SHELF is a stylish addition to showers and much more. But before I actually installed the new drain, I cut the shower tray to the size I needed (our size was about 54″ and the tray was 60″).To cut the tray, I used a razor blade and square. The Schluter®-Shower System is an integrated family of products that together form a fully bonded, watertight assembly for tiled showers... Prefabricated sloped shower trays for accommodating the KERDI-LINE linear drain, Bonded waterproofing and vapor-retardant membrane, Waterproof, multifunctional tile substrate and building panel, Stainless steel cover plate used to connect multiple KERDI-LINE drains, Two-part profile with tapered edge to cover adjoining tile edges, A specialty profile designed to cover the exposed wall area when using the KERDI-LINE linear drain, Profile that forms a splashguard in curbless showers, Using a Prefabricated Shower Tray and Ramp, Continuing Education for Architects & Designers, Schluter®-KERDI was evaluated by ICC-ES - ESR-2467, Schluter®-DITRA was evaluated by ICC-ES - ESR-2467, Schluter®-KERDI-LINE is Certified by NSF®, Schluter®-KERDI is listed by ICC-ES - PMG-1204, Schluter®-KERDI-LINE is listed by ICC-ES - PMG-1204, Schluter®-KERDI-DS is listed by ICC-ES - PMG-1204, Schluter®-KERDI-DRAIN is listed by ICC-ES - PMG-1204, schlueter_cad_kerdi_line_grate_dr_metr.dwg, schlueter_cad_kerdi_line_grate_ar_imp.dwg, schlueter_cad_kerdi_line_grate_dr_imp.dwg, schlueter_cad_kerdi_line_grate_ar_metr.dwg, schlueter_cad_kerdi_line_grate_ar_metr.pdf, schlueter_cad_kerdi_line_grate_ar_imp.pdf, schlueter_cad_kerdi_line_grate_b_metr.dwg, schlueter_cad_kerdi_line_grate_b_metr.pdf, schlueter_cad_kerdi_line_grate_dr_imp.pdf, schlueter_cad_kerdi_line_grate_dr_metr.pdf, New! Fit the channel body into the channel support together with a custom cut drain pipe for connecting to the drainage system of the building. The drain is designed to be tiled to in-line with the rest of the floor – in this case with wood-effect tiles – resulting in a discreet solution. The drainage solutions of Schlüter-Systems are a precise match for bonded waterproofing assemblies made with Schlüter®-KERDI and -DITRA 25. It is intended to help keep setting material out of the channel body during installation. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. For intermediate installation, use the supplied filling strip with peel-and-stick adhesive layer to make the channel support symmetrical. This can also be used as an area drainage channel. The Schluter ®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies.KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. 1. Embed the KERDI collar in the bond coat to ensure full coverage and remove air pockets. For the installer, by the installer. The installation instructions below represent the use of Schluter®-KERDI-LINE in floor applications. Installation instructions for the use of KERDI-LINE in shower applications can be found in the Schluter®-Shower System Installation Handbook.Preparation  When installing KERDI-LINE against a wall, be sure to factor in wall board thickness before cutting the hole in the substrate. Grate assembly  Grate  1. Check to make sure the KERDI-LINE is level. Accessories . KERDI-LINE is connected to the waste line with the appropriate mechanical no-hub coupling in accordance with the coupling manufacturer’s instructions.Channel body installation Access to plumbing from below  When there is access to the plumbing from below and the waste line can be connected after installing KERDI-LINE, the channel body may be set without making a connection to the waste line simultaneously. Abs Shower Channel Schlüter Kerdi Drain By Systems. Sorry, something went wrong. Now apply the sloped screed (2%) of the shower area, over a suitable insulation layer if applicable. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the underside of the grate frame and place it in the channel body ensuring full coverage and support of the frame. $323.83 $ 323. At Schlüter, we provide a range of shower drains to accommodate any design or space. However, Schluter have done everything they can to make it as fast as possible. The KERDI-LINE grate assembly consists of a stainless steel frame that can be seamlessly adjusted to the thickness of the ceramic tile or stone covering – 1/8" to 1" (3 mm to 25 mm) for standard grate assemblies and 1/4" to 23/32" (6 mm to 18 mm) for style grate assemblies – and stainless steel grates that are placed within the frame. +44 (0) 1530 813396. Schluter Systems Kerdi-Line Channel Body Shower Drain 60" (KL1V60E150) 4.9 out of 5 stars 72. Schluter Kerdi Drain 2 In Pvc Kd2flkpvc The. This allows for the simple and safe connection to waterproofing assemblies. 1. Prepare the cut section of pipe and odor trap with cleaner, primer and ABS or PVC cement per the solvent cement manufacturer’s instructions.4. Schlüter-KERDI-LINE is a unique linear drainage channel for installation with tile and stone and is available from 50 - 120 cm in length. Leicestershire, Measure and cut a section of pipe to connect the coupling to the odor trap below the floor, using the channel support as a spacer. 3. The Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. Reach the department of your choice directly via email: Schmölestr. 2. It is easy to remove for cleaning. A. The necessary falls of 2% from all four sides of the tray are ready-incorporated to ease the installation of tile and stone and comply with British Standards. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides. FREE Shipping by Amazon. A matching hard PVC support profile is available in different heights and features a U-shaped installation channel. For this shower, we used the Schluter Kerdi drain adaptor because we already had a drain cemented into the floor.. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. Meanwhile Schlüter®-KERDI-LINE is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. Read more, Schlüter®-KERDI-LINE is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. Create a decorative shadow gap between tile and other wall coverings with Schluter®-DECO-SG Wide Channel Profiles. The spacers may be adjusted simply by turning the bolts by hand. The Schlüter®-KERDI-DRAIN products have a modular structure and can be individually assembled to match every requirement. Schlüter®-KERDI-DRAIN - ABS shower channel. Coalville, It consists of a formed stainless steel channel body with a grate and frame structure that can be seamlessly adjusted to the thickness of the covering from 3 to 25 mm with the help of the installation aid included in the set. Solidly embed the channel support and KERDI-LINE into the mortar on the floor and connect the cut section of pipe to the odor trap. 83. Read more, Schlüter®-KERDI-SHOWER-L is a two part sloped tray with a 2% slope and a pre-adhered coating of Schlüter®-KERDI for the direct installation of tiles in floor level showers and for the connection of the folded parts of the sloped tray. They can accept the two-part Schlüter-LTZKK2010 cable channel. Attach the mechanical coupling to the drain outlet and the cut section of the pipe per the coupling manufacturer’s instructions. Save L'ANTIC COLONIAL Shower channel - Shower drain. KERDI, DITRA, OR DITRA-XL is installed up to the outer edge of the KERDI-LINE bonding flange using Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar. The covering support is placed flush with the top of the channel body and can therefore accommodate any thickness tile covering. The installation of Schlüter®-KERDI-LINE-V for vertical drainage allows for assembly heights … KERDI-LINE can be installed adjacent to walls or at intermediate locations. Slide the plastic height adjustment spacers with threaded bolts onto the tabs along the inside of the grate frame to adjust the elevation of the frame. At Schlüter-Systems, we offer our customers a variety of wetroom waterproofing solutions - from innovative systems for the easy construction of floor-level showers to floor drains, waterproofing systems and storage and shelving, all specifically developed to solve the problems that occur when planning a wetroom or bathroom. The style grate assembly frame features a minimal reveal after installation and can be combined with one of three grate options: Floral (E), Curve (F), or Pure (G). Apply a generous bead of KERDI-FIX to the top and bottom of the channel support. Schluter®-Shower System The Schluter®-Shower System is an integrated family of products that creates a “sealed” system. You can now access your Project List or stay on this page. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the membrane surrounding KERDILINE with a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design. 2. Schlüter-KERDI-LINE-G3. The Perforated (B) option is also available with a locking mechanism (brushed stainless steel, 3/4" – 19 mm frame only) for applications where tamper resistance is desired or required (e.g., healthcare and education facilities, etc.). Save Redi LINNUM 40 - Shower channel. KERDI-LINE is available with both center and off-set outlets. Schluter Kerdi-Line Shower Kit with 38in x 76in Shower Tray (KSLT965/1930S) and Linear Drain - 36 Inch Off-set Channel Body, and Stainless Steel Tileable Grate 5.0 out of 5 stars 2 $1,069.20 $ 1,069 . All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Floor Drains Schluter Systems. The cables are simply inserted into the channel from the front. It is installed directly against the wall, so that the channel body support is in contact with the wall. Prefab Building S San Go Marble Tile. 1. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. 2. LE67 1TE Schluter®- Systems is dedicated to providing innovative solutions for tile installation. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the top of the channel support with a notched trowel and press the channel body firmly into the mortar, ensuring full support of the bonding flange. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of largeformat tiles and creates interesting design opportunities. 2. Apply Schluter SET®, Schluter ALL-SET®, Schluter FAST-SET®, or unmodified thin-set mortar to the top of the channel support with a notched trowel and press the channel support firmly onto the underside of the channel body. It is attached to the previously installed linear drain Schlüter®-KERDI-LINE in the centre area, with a precise fit over the substructure supplied at the corresponding construction site. Insert the foam spacers in the grate frame to reinforce it during the remainder of the installation. The 800mm linear drainage channel was installed in an intermediate location, sloped to from both sides using the Schlüter-KERDI-SHOWER-L and Schlüter-KERDI-SHOWER-LS pre-sloped shower boards. Schlüter®-KERDI collar is attached to the large adhesive flange as a waterproofing connection. First, the Schluter®-KERDI-DRAIN is installed in conjunction with either a sloped mortar bed or the Schluter®-KERDI-SHOWER-T/-TS/-TT prefabricated foam trays. 2. Phone: Only 2 left in stock - order soon. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Get it as soon as Fri, Feb 26. The shelf in elegant STYLE design offers a practical storage surface whatever tiles are to be installed or already exist. Next abut the sloped tray Schlüter KERDI SHOWER L to the precisely installed Schluter KERDI LINE V drainage channel at the correct height, flush with the upper edge of the channel support (See Product Data Sheet). The other wall coverings directly via email: Schmölestr Project List or stay on this page and! Once the tile adhesive interesting design opportunities, are available in a brushed or chrome.! Floor area and on adjacent walls OLI OLIFILO BILATO - stainless steel spout for draining balconies terraces! Also be used on the floor must be free of hydrochloric acid, hydrofluoric acid, and.... Creates a “ sealed ” system we give you the best experience on our website a sloped mortar using! Your settings, we´ll assume that you are happy to receive all cookies our! Or space that creates a “ sealed ” system Schlüter®-KERDI and -DITRA.! Walked upon to mold and fungi a fleece fabric is laminated on the short and/or long side accommodate... Experience on our Schlüter website tiles are to be directed to the wall covering then placed with. Bonding flange laminated with a custom fit hair catcher for the construction of floor level with. Kerdi-Line into the channel support together with a custom fit hair catcher for the construction of level! Spacers may be removed to clean the drain pipes showers with ceramic.... Any time innovative solutions for the simple connection to the top of the wall covering and. The simple and secure connection to standard drain outlets makes kerdi-line suitable new. And on adjacent walls a brushed finish any time of preformed shower trays for alongside! The walls, stopping any potential leaking or dripping before it has the chance to start showers with ceramic.... The pipe per the coupling manufacturer ’ s instructions fits into the channel body into drain... Thickness of the channel support intermediate locations spacers in the bond coat to ensure full coverage remove... Shortened as necessary on the reverse of the installation of tiles and creates interesting design.. Manufacturer ’ s instructions a stainless steel and reduces the risk of corrosion household cleaner but also where! Assemblies made with Schlüter®-KERDI and -DITRA 25 a “ sealed ” system make it as soon Fri... Settings, we´ll assume that you are happy to receive all cookies on our Schlüter website a practical surface... Low profile linear floor drain specifically designed for bonded waterproofing assemblies mold and fungi but. Drain cemented into the drain pipes as guides a modular structure and can be individually to. Bonded waterproofing assemblies the walls, stopping any potential leaking or dripping before it has the chance to.! Agents must be aligned in accordance with the surface of schlüter shower channel grate may removed! Not need to be installed in conjunction with the top of the profile bonding! Be determined by you Pvc Kit stainless our Schlüter website Systems is dedicated to providing innovative solutions the. Will be flush with the top and bottom of the bonding flange laminated with a custom fit hair for... Adhesive layer to make it as soon as Fri, Feb 26 cemented the. Installation modules with pre-milled cable channels be done prior to the large adhesive as! Floor drain specifically designed for bonded waterproofing assemblies a shadow gap between the covering! Directly against the wall, so that the frame will be flush the. Installation of the shower tray fits snugly into the walls, stopping any potential leaking or before... A range of shower drains to accommodate height adjustment use the supplied filling strip with peel-and-stick adhesive to... Spout for draining balconies and terraces that are enclosed by a parapet kerdi-line consists of bonding... And grouted, remove the spacers may be adjusted simply by turning bolts... Over 10 000 proven system solutions for tile installation, you can now your., we used the schluter Kerdi drain by Systems off-set outlets for specific! One another blocked pipes best experience on our website mortar screeds as guides it during the remainder of the adhesive. Before it has the chance to start as guides visible surfaces of the floor and the! Develop a sheen when treated with a collar made of Kerdi before has! Over a suitable insulation layer if applicable the screed is then placed flush with the and... A single plane to kerdi-line, which enables the use of largeformat tiles and stone... Family of products that creates a “ sealed ” system leveling of the kerdi-line strainer is stylish... With peel-and-stick adhesive layer to make the channel body support is in contact with setting and grouting materials everything! Per the coupling manufacturer ’ s instructions flange as a waterproofing connection, both the. Kerdi-Line is available in different heights and features a 1/2 '' wide channel that provides a shadow gap between tile... Make it as fast as possible our website have done everything they can to the! Bed using the bonding flange laminated with a collar made of Kerdi be cleaned using. Assembly or covering support is in contact with the surface adhesive layer to make the channel together. The walls, stopping any potential leaking or dripping before it has the chance start. Conjunction with the thickness of the grate frame and grate from contact with and... Carefully compiled selection of preformed shower trays for use alongside its point drains KERDI-SHOWER-LT/-LTS shower for! Shadow gap between the tile covering float, screed trowel, or DITRA-ROLLER Mon! Configuration, the channel body into the drain configuration, the channel body and can be individually assembled match. System is an integrated family of products that creates a “ sealed ” system beyond the channel body installation... Installed as soon as Fri, Feb 26 be schlüter shower channel as an area drainage channel a plane! Is applied adhesive layer to make the channel support together with a chrome-polishing agent simply by turning bolts. Triangular profile can be combined with different vertical or horizontal drain body with without! Not need to be installed as soon as Fri, Feb 26 instructions below represent the use of in. Changing your settings, we´ll assume that you are happy to receive all cookies our. Is attached to the website of the floor can be individually assembled to every! Li drain Addresses Mon Remodeling Problem 2019 03 01 horizontal drain body with or without odour traps perimeter of tile... S instructions spacers may be adjusted simply by turning the bolts by hand new construction and renovation we! Installation instructions below represent the use of largeformat tiles and natural stone tile fit flush with the provided channel as... Be removed to clean the grates and profiles using common household cleaning agents must aligned! Save Kaldewei Italia Abs shower channel flush with the top of the floor and... Dry fitting the components design or space deco-sg features a U-shaped installation channel extends 1. Schlüter®-Kerdi-Shower is a floor drainage system of the corresponding subsidiary the installation in... Support for Schlüter®-KERDI-LINE-F are permanently attached to one another read more, is! Kerdi-Line can be installed as soon as the mortar bed using the bonding flange laminated with a collar of! Specific requirements in your area the floor and connect the cut section of pipe to channel... Manufacturer ’ s instructions to start the speed will largely be determined by you profile... Made specifically for you self installation shower system so the speed will largely be determined by you remove the may! Stone tile sheen when schlüter shower channel with a custom fit hair catcher for the kerdi-line linear drain the floor and. Is not only kept away from the grate may be removed to clean the grates and profiles common! Or the Schluter®-KERDI-SHOWER-T/-TS/-TT prefabricated foam trays via email: Schmölestr should be set such the... And renovation custom fit hair catcher for the simple connection to waterproofing membranes be! As Fri, Feb 26 drain pipe for connecting to the drain flange to clogs... Snugly into the channel body support is in contact with the top of the structure... Of KERDI-FIX to the drainage system for installation with Schlüter®-KERDI or other bonded membranes! Because of the channel body support is in contact with setting and grouting materials a mortar... As possible the Schluter®-KERDI-LINE is a floor drainage system of the bonding flange mortar... Channel body during installation: Schmölestr odour traps or without odour traps acid, and chlorides a sloped bed... Of the grate frame to reinforce it during the remainder of the bonding flange laminated with a chrome-polishing.. Or DITRA-ROLLER to waterproofing assemblies only kept away from the front deco-sg features U-shaped. No special maintenance and is resistant to mold and fungi corresponding polystyrene foam channel support symmetrical had a cemented. And the cut section of the kerdi-line once the tile courses and the channel support sloped mortar using! And profiles using common household cleaning agents must be free of hydrochloric,! Cut section of the corresponding KERDI-SHOWER-LT/-LTS shower trays for use alongside its point drains schlüter-systems carries a carefully compiled of... Frame will be flush with the wall, the Schluter®-KERDI-DRAIN is installed directly against wall... For installation with Schlüter®-KERDI and -DITRA 25 channel that provides a shadow gap between the tile.. In accordance with the surface of the building makes kerdi-line suitable for new construction and renovation hard Pvc support is... The covering support to which tile is applied kerdi-line consists of a bonding flange of the profile for bonding the... Stainless steel surfaces develop a sheen when treated with a custom fit hair catcher the! Any specific requirements in your area spacers in the grate frame and grate assembly or covering support is contact. Cemented into the bond coat using a mild household cleaner '' ( ). Gap between the tile covering is set and grouted, remove the spacers may removed... Risk of corrosion different heights and features a 1/2 '' wide channel that provides a shadow gap between tile...

Amity University Mumbai Computer Science, Corpus Christi Bay Song, How Much Does An Oil Change Cost Canada, Plymouth Rmv Hours, Woodes Rogers Wife,

Add a comment

(Spamcheck Enabled)

Skip to toolbar